Description
The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high-viscosity, materials with superior results. Materials: Polyurethane, Plural Component Protective Coatings, Epoxy Coatings, High Solids Coatings, 100% Solids Coatings, Urethanes, Polyurethane Coatings.
Benefits
- Six fixed mix ratios are available: 1:1, 1.5:1. 2:1, 2.5:1, 3:1 and 4:1.
- With the Graco XP70, you eliminate waste and save money because you only mix as much material as you need.
- Reduced cleaning time means you save labour costs and increase uptime.
- Operators are up and running in just minutes, with a minimum amount of training time. The Graco XP70 runs right out of the box with nothing to set up.
- Engineered to proportion with two pumps instead of three, the Graco XP70 cuts preventive maintenance by at least one-third.
Markets
- Building & Construction, Steel Contruction
- Transportation, Marine
- Transportation, Railway
- Energy, Wind
- Energy, Waste Water Treatment
- Energy, Oil & Gas
- Building & Construction, Protective Coating
Materials
- Polyurethane
- Plural Component Protective Coatings
- Epoxy Coatings
- High Solids Coatings
- 100% Solids Coatings
- Urethanes
- Polyurethane Coatings
| Fluid Specifications | |
| Fluid Working Temperature, Max. | 71 °C |
| Fluid Working Temperature, Min. | 4 °C |
| Fluid Viscosity | 200-20,000 cps |
| Fluid Inlet Size | 1/4 in NPT(m) |
| Material Wetted Parts | Stainless Steel, Carbon Steel, Carbide, Zinced, Ultra High Molecular Weight Polyethylene (UHMWPE), Polytetrafluoroethylene (PTFE), |
| Polyamide (PA), Nickel, | |
| Pump Ratio 70:1 | |
| Tip Size, Max., Two Guns | 0.023 inch |
| Air Specifications | |
| Air Working Pressure, Max. | 12 bar |
| Air Inlet Size | 3/4 in NPT(f) |
| Power Specifications | |
| Sound Pressure Level | 86 dB(A) |
| Sound Power Level | 98 dB(A) |
