TS500R Multi-Purpose Digital Controller

TS500R Multi-Purpose Digital Controller

Cost Effective and Productivity-focused Multi-Purpose Digital Controller.
The TS500R is the first of its type, in the industry, and is capable of controlling all Techcon systems valve series including: Pneumatic Valves, Spray Valves, Rotary Auger Valves and Rotary Auger Valves with encoder motor. With a universal power supply it is a fully ‘plug and play’ system and can be used immediately, anywhere in the world, with its accompanying tools and accessories.
The TS500R Series is equipped with digital timer and pressure read-out on a large LCD screen. Pressure can be set in both psi and bar. The user friendly firmware provides an option of programming up to 10 varied, sequenced or individual shots. These systems have a user programmable manual (purge) and automatic dispense cycle settings (program and time) and the they feature a “Teach Mode” for determining the dispensing time required with dispensing output is unknown.
Integration into semi-automatic and automatic machinery is made easy with the interface connector, on the rear of this system. Through use of the interface port, the dispense cycle can be initiated, stopped and an end-of cycle signal can be fed back to the host machine in order to start the next dispense cycle. A low pressure warning feature is also included to help maintain uninterrupted dispensing.

System Dimensions W x L x H: 10.2” x 7.5” x 3.9” (259mm x 191mm x 99mm)
Cycle Rate: 900 cycles/minute
Timing Range: 0.008 – 60.000 seconds
Timing Repeat Tolerances: +/- 0.001%
Input Pressure: 100psi (6.9bar) maximum
Operating Pressure: 1 – 100psi (0.07 – 6.9bar)
Cycle Mode: Timed, Purge, Teach and Interrupt
Meets or Exceeds: CE, TUV-GS and NRTL