Graco Monark 2-ball Piston Pump

Pneumatic 2-ball Piston Pump
Monark – President

With Air motor as Monark and President proven for reliable and durable performance.

Feature

  • Easy to operate and maintain
  • Easily integrate into a PLC network
  • Reliable Monark and President air motors
  • Multiple package configuration to fit your specific application.

Application

  • Automotive & Metal Finishing
  • Anti Corrosion
  • High Solids
  • Adhesive & Sealant

Stainless Steel ASME Pressure Tanks

Designed for flexibility, these Stainless Steel ASME Pressure Tanks are available in 2, 5, 10, and 15-gallon (7.6, 18.9, 38, and 57 liter) models.

Feature

  • Heavy-duty gear-reduced agitator provides more power for high solids
  • Improved access with a bottom outlet kit reduces material waste
  • Polyethylene tank liners available for quick color change and easy clean-up
  • Stainless steel construction allows for use with all materials
  • Ideal for infrequent or build to order production
  • Inexpensive, flexible, and easily upgraded to add functionality compared to other systems

Stainless Steel ASME Pressure Tanks - Creative Engineering

Graco L20C Supply System

Benefits

  • Durable NXT Air Motor lasts ten times longer than its predecessor
  • Common and shared parts throughout rams and air motors provide low carrying costs, even when multiple configurations are used within a plant
  • Electric tandem systems significantly reduce downtime with advanced monitoring and control systems
  • Quick placement of drum or pail
  • Integrated air controls offer easy-to-see, easy-to-use controls

Solutions

  • Glueing, Bonding & Sealing 1K

Markets

  • Automotive
  • Electronics
  • Energy, Solar
  • Energy, Wind
  • Transportation, Off-Road Vehicles
  • Transportation, Car
  • Vehicle Maintenance, Truck & Bus

Husky 515 Air-Operated Double Diaphragm Pump
Husky 515 Air-Operated Diaphragm Pumps
Maximum Fluid Working Pressure 100 psi
Air Pressure Operating Range 30 to 100 psi
Maximum air consumption 28 scfm
Maximum free-flow delivery 15 gpm
Maximum pump speed 400 cpm
Gallons (Liters) per cycle 0.04
Maximum suction lift (water with buna balls) 15 ft dry, 25 ft wet (4.5 m dry, 7.6 m wet)
Maximum size pumpable solids 3/32 in (2.5 mm)
Operating Temperature Range*
Minimum, all pumps 40°F
Maximum, acetal pumps 180°F
Maximum, polypropylene pumps 150°F
Maximum, aluminum, stainless steel, PVDF pumps 225°F
Sound power level (measured per ISO standard 9614–2)
At 70 psi (0.48 MPa, 4.8 bar) at 50 cycles per minute 77 dB(A)
At 100 psig (0.7 MPa, 7 bar) at maximum cycles per minute 95 dB(A)
Sound pressure level (measured 1 m from pump)
At 70 psi (0.48 MPa, 4.8 bar) at 50 cycles per minute 67 dB(A)
At 100 psig (0.7 MPa, 7 bar) at maximum cycles per minute 85 dB(A)
Inlet/Outlet Sizes
Air inlet size 1/4 npt(f)
Air exhaust port size 3/8 npt(f)
Fluid inlet size 1/2 and 3/4 in npt(f) or bspt(f)
Fluid outlet size 1/2 and 3/4 in npt(f) or bspt(f)
Wetted Parts (in addition to ball, seat, and diaphragm materials, which vary by pump)
Polypropylene pumps polypropylene, PTFE
Acetal pumps groundable acetal, PTFE
PVDF pumps PVDF, PTFE
Non-wetted external parts
All pumps polypropylene, stainless steel, polyester and aluminum (labels), nickel-plated brass
Weight
Polypropylene pumps 6.5 lb (2.9 kg)
Acetal pumps 7.8 lb (3.5 kg)
PVDF pumps 8.5 lb (3.9 kg)
Santoprene® is a registered trademark of the Monsanto Company.

Graco XP70

Technical Specification

Motor Size NXT 6500
Max. Working Pressure psi (bar) 7250 (500)
Heater Optional
Ratio (Fixed) 1:1 to 4:1

Your Product Description

High pressure for two-part high solids coatings

Materials

Plural component protective coatings, epoxy coatings, high solids coatings, 2 Part PU coatings, Urethanes

Application

Structural Steel Coating, Ship building & marine, waste water treatment, corrosion control, offshore rigs, Pipe & tank coating, waste water treatment

Railcar Manufacturing & repair

Picture Gallery

Husky 2150 pump range

Benefits

  • Quick priming and immediate flow of product
  • Handles fluid viscosities up to 5,000 cps and solids up to 0.09 inch (2.29 mm)
  • Runs dry without damage. Provides air-tight seal for moisture-sensitive fluids
  • Easy-out seal provides fast slide in and out of drums (through bung adapter) without disconnecting hoses. Easy-out seal accommodates slightly off-sized drums up to 2-1/2 in. (63.5 mm).

Excellent for abrasive, low-to-medium viscosity fluids and shear sensitive materials

Features

  • Easy Maintenance
    Low internal volume reduces waste and makes clean-up easy. Stainless steel bolts resist vorrosion and provide positive positioning for easy reassembly.
  • Fluid Compatibility
    Housings available in aluminium, stainless steel, polypropylene, groundable acetal or Kynar.
  • Fluid Control Choice
    A wide range of seat and ball options ensure fluid compatibility and positive seal for maximum efficiency, long life and better suction lift.
  • Long-Lasting Rod Design
    300 Series stainless steel rod designed for long life and corrosion resistance – even in wet air.
  • Unique, Patented Air Valves
    Three-way Pilot Valve for non-sticking operation. All parts are replaceable without opening wet body parts. Aluminium parts are anodized or epoxy coated to resist corrosion usually caused by dirty air. No air-line lubrication is required.
  • Precision-Fitted Parts
    Long-wearing end-bearings assure positive rod alignment and are easily replaced.Graco Husky 2150 pump range
  • Rugged Exterior Construction
    Construction resists corrosion, prevents leakage and ensures clean fluid changes. Anodizing on aluminium wetted parts and e-coat epoxy air section resists tough environments.
  • Pump wetted parts and center section available in different materials
    The availability of multiple materials make it possible to use the pump in a wide range of applications: from low to high abrasive and corrosive fluids.

Typical Applications

  • Drum fluid transfer
  • Bulk fluid supply
  • Chemical evacuation
  • Ground water and sump evacuation
  • Waste fluid removal
  • Tank and bilge drainage
  • Slurry and sludge transfer
  • Filter press feed

Typical Fluids Handled

  • Acids and gases: acetic, chromic, hydrochloric, hydroflouric, sulphuric, nitric and phosphoric
  • Ship cleaning and stripping chemicals
Fluid Specifications
Fluid Flow, Max. 3900 cc per cycle (132 oz per cycle)
Fluid Flow, Max. 568 liters per minute (150 gallon per minute)
Fluid Working Temperature, Max. 65.5 °C (150 °F)
Fluid Viscosity 20000 cps
Fluid Inlet Size 2 in BSP(f)
Fluid Outlet Size 2 in BSP(f)
Material Wetted Parts Stainless Steel 316, Cast Iron, Aluminium, Fluoropolymer Resins (PVDF), Polypropylene (PP),
Air Specifications
Air Consumption 4995 liters per minute (176 scfm)
Air Inlet Size 1/4 in NPT(f)

FinishPro 290 Sprayer

Air Assisted Airless Sprayer – FinishPro 290.
Ideal for contractors who need a high quality finish at a higher production rate than HVLP. The FinishPro offers a high-quality finish at a high production rate. The ideal unit for renovation of cabinets, lighting features, shutters, fences, trims, stairs, staircases, or for painting doors, walls, decks and ceilings. The FinishPro 290 fits perfectly as a professional fine finish unit whereas the FinishPro 390/395 handles the most challenging materials.

Fluid Specifications
Fluid Working Pressure, Max. 2600 psi
Tip Size, Max., One Gun 0.017 inch
Air Specifications
Air Working Pressure, Max. 35 psi
Power Specifications
Engine Output 0.5 Horsepower
Dimensions
Weight, complete 68 lbs

Materials:

  • Latex
  • Lacquers
  • Primers
  • Acrylic
  • Varnishes
  • Enamels
  • Water-based paint
  • Solvent based paint

D200 Graco supply system

For high-volume in-plant applications of medium to high-viscosity materials.

Benefits

  • Durable NXT Air Motor lasts ten times longer than its predecessor.
  • Common and shared parts throughout rams and air motors provide low carrying costs, even when multiple configurations are used within a plant.
  • Electric tandem systems significantly reduce downtime with advanced monitoring and control systems.
  • Quick placement of drum or pail.
  • Integrated air controls offer easy-to-see, easy-to-use controls.

Solutions

  • Glueing, Bonding & Sealing 1K

Markets

  • Automotive
  • Electronics
  • Energy, Solar
  • Energy, Wind
  • Transportation, Off-Road Vehicles
  • Transportation, Car
  • Vehicle Maintenance, Truck & Bus

Triton 1:1 150 Pumps Series

Air-Operated

Features

  • Supplies up to 35% extra air flow to gun for superior atomization
  • Saves material and time during flushing, priming and color changes
  • Delivers a consistent spray pattern and uniform film thickness
  • Sprays a wide variety of material viscosities
  • Reduces operator fatigue
  • Double diaphragm pump designed specifically for finishing applications
  • Low pulsation output provides smooth pump changeover
  • Low shear design for minimal degradation of shear sensitive materials
  • Rugged aluminum and stainless steel construction handles a wide variety of fluids

Materials

  • Solventborne
  • High Solids
  • Xirallic
  • CARC
  • Metallics
  • Fast-Set
  • Epoxies

Applications

  • General Metal Finishing – Pumping
  • Wood Finishing – Pumping
  • Plastic Finishing – Pumping

Air