Hydra-Mate Plural Component Proportioning/Dispensing System

Hydra-Mate is designed to proportion, mix, pump and dispense sealants and adhesives with wide variations in base/catalyst ratio and viscosity. This single, integrated system feeds the applicator guns of your choice and delivers a consistent, high-flow output with ratio accuracy to 2% – ensuring consistent curing and high productivity.

Feature

  • Maximizes material savings by keeping mixed materials to a minimum.
  • Delivers a consistent, high-output flow of material, ensuring line speed and proper curing.
  • Variable ratio mixing capabilities ranging from 4:1 to 16:1.
  • Fitted with an adjustable boom and your choice of applicator gun.

Application:

  • Window and Curtain wall
  • Sealing
  • Fenestration
  • Adhesive & Sealant

Reactor E-10HP
Maximum fluid working pressure 3000 psi
Maximum spray pressure: 120 V 2200 psi
Maximum spray pressure: 230 V 2500 psi
Maximum fluid temperature 170°F
Maximum ambient temperature 120°F
Maximum output 1 gal/min
Output per cycle (ISO and RES) 0.0038 gallons/cycle
Air inlet 1/4 in. quick-disconnect industrial type pin fitting
Air outlet 1/4 npsm(m)
Overpressure relief Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Gun compressed air requirements 3
Maximum hose length 105 ft
Tank capacity each (nominal) 6 gal
Weight (empty) 239 lb

Your Product Description

High-Pressure Coating Equipment for Polyurea
Entry-level system for pure and hybrid polyurea coatings

Feature

  • Ideal for small to medium projects such as terraces, pools, balconies,
    tanks, truck bedliners, secondary containment and waterproofing
  • Heats material fast for better productivity
  • Portable, compact and easy to maneuver
  • Easy to use
  • Uses standard residential electrical outlet
  • Affordable

Application

Secondary Containment Spill Prevention
Truck Bedliners
Waterproofing

Materials

Polyurea

Graco H-50

Technical Specification

Max. Working Pressure psi (bar) 2,000 (138)
Output 23.6 kg/min
Heater (kW) 12.0 ; 15.3 ; 20.4
Max Fluid Temperature 88°C
Max. Hose Length 410 ft (125m)
Weight 271 kg
Ratio 1:1

Your Product Description

Graco’s most powerful foam proportioner for high output applications

Materials

Foams & High Output PU

Application

Roof coating, pipe joint sealant, roof & wall insulation

Picture Gallery

Graco H-XP3

Technical Specification

Max. Working Pressure psi (bar) 3,500 (241)
Output 2.8 gpm (10.6 lpm)
Heater (kW) 12.0 ; 20.4
Max Fluid Temperature 88°C
Max. Hose Length 410 ft (125m)
Weight 271 kg
Ratio 1:1

Your Product Description

Designed for applying polyurea and other coatings that require high pressures, the Reactor H-XP2

Materials

Polyurea, Hybrid Polyurea, Polyureathane & Foam

Application:

Waterproofing, pipe & tank coating, waste water treatment, corrosion control, offshore rigs, ship building & marine.

Graco Reactor 2 E-XP2

Technical Specification

Max. Working Pressure psi (bar) 3,500 (241)
Output 2.0 gpm (7.6 lpm)
Heater 15 kW
Max Fluid Temperature 88°C
Max. Hose Length 310 ft (94m)
Weight 159 kg
Ratio 1:1

Your Product Description

Reactor 2 E-XP2 is the next generation reactor for spray foam insulation and polyurea

Materials

Polyurea, Hybrid Polyurea, Polyureathane & Foam

Application

Waterproofing, pipe & tank coating, waste water treatment, corrosion control, offshore rigs, ship building & Marine, roof & wall insulation

Picture Gallery