InvisiPac Hot Melt Delivery System

Features:

  • Quick start-up – ready in less than 10 minutes, eliminating costly downtime.
  • No tank – adhesive supplied and melted to meet your application’s demand means less adhesive time at high temperature.
  • Less adhesive time at high temperature means less char and less material degradation.
  • Less char results in reduced nozzle plugging, less system maintenance and more uptime.
  • Great performance, even with low-cost adhesives.
  • Safe.

How it works

  • Vacuum system feeds pellets to an in-line melt chamber.
  • Pellets are automatically added as needed.
  • The InvisiPac System sends a continuous flow of adhesive through production – significantly reducing the time adhesive spends at high temperature.

Graco UltraMax II 695 sprayer

The Ultra Max II 695 is the industry standard for professional contractors who spray a full range of coatings on residential, commercial and industrial jobs. The Ultra Max II 695 handles the most common tip sizes, longer hose lengths and heavier coatings with ease.

  • Proven Endurance Pump for exceptional pump life with QuikAccess intake valve to easily clean or clear debris.
  • SmartControl Pressure Control – advanced microprocessor control delivers a consistent spray fan at all spraying pressures.
  • MaxPower Brushless DC Motor – delivers higher horsepower per wall amp.
  • Chrome Plated Welded Steel Hi-Boy Cart with TiltBack cart design – withstands rugged environments.
  • Easy Out Pump Filter – reduces tip clogs and ensures quality finish.

Ultra Max II 695 Specifications:

Max operating pressure 3300 psi
Max tip size Up to 0,031″
Gallons per minute Now Upgraded to .95
Sprayer weight 93 lbs.
Motor hp 2.0 hp Brushless DC

UltraMax II 495 sprayer

The Ultra Max II 495 features the leading technology and performance of Graco’s larger Ultra Max II models. The Ultra Max II 495 is the sprayer of choice for professionals who need a higher output sprayer for daily use on residential jobs.

  • Primers
  • Stains
  • Acrylics
  • Enamels
  • Latex

UltraMax II 495 sprayer - Creative Engineering

TexSpray RTX 1500
  • RotoFlex HD Texture Pump*
    • 2.0 gpm (7.5 Lpm) output gets the job done quickly
    • 100 psi (7 bar) material pressure allows longer hose lengths, minimizing time spent moving the sprayer
    • Large, 7/8-in ID pump tube passes large particles easily
  • Automatic Pressure Unloader*
    • Ensures a soft start with each trigger pull
    • Eliminates the material blast that can impact finish quality
    • Results in less material waste and less clean up
    • Dramatically extends pump life
  • QuikChange Pump Section
    • No-tools pump removal and replacement
    • Changes in less than 5 minutes
  • High-Output Air Compressor
    • Produces 6.5 cfm @ 45 psi
    • Projects texture farther
    • Maximum 10.2 cfm displacement for long life
  • Larger-Capacity Hopper
    • 15-gallon capacity
    • Steep sided to keep the thickest muds flowing to the pump
    • No-tools removal for easy clean up

* Patent pending
Material

  • Premixed Materials
  • Fillers
  • Drywall Mud

Stainless Steel ASME Pressure Tanks

Designed for flexibility, these Stainless Steel ASME Pressure Tanks are available in 2, 5, 10, and 15-gallon (7.6, 18.9, 38, and 57 liter) models.

Feature

  • Heavy-duty gear-reduced agitator provides more power for high solids
  • Improved access with a bottom outlet kit reduces material waste
  • Polyethylene tank liners available for quick color change and easy clean-up
  • Stainless steel construction allows for use with all materials
  • Ideal for infrequent or build to order production
  • Inexpensive, flexible, and easily upgraded to add functionality compared to other systems

Stainless Steel ASME Pressure Tanks - Creative Engineering

Reactor A-25

Material:

  • Spray Polyurethane Foam

Line Voltage Requirement
230V 1 phase and 230V 3 phase units 195-264 Vac, 50/60 Hz
380V 3 phase units 338-457 Vac, 50/60 Hz>
Fluid Outlets
Component A (ISO) #8 JIC (3/4-16 unf), with #5 JIC adapter
Component B (RES) #10 JIC (7/8-14 unf), with #6 JIC adapter

Husky 515 Air-Operated Double Diaphragm Pump
Husky 515 Air-Operated Diaphragm Pumps
Maximum Fluid Working Pressure 100 psi
Air Pressure Operating Range 30 to 100 psi
Maximum air consumption 28 scfm
Maximum free-flow delivery 15 gpm
Maximum pump speed 400 cpm
Gallons (Liters) per cycle 0.04
Maximum suction lift (water with buna balls) 15 ft dry, 25 ft wet (4.5 m dry, 7.6 m wet)
Maximum size pumpable solids 3/32 in (2.5 mm)
Operating Temperature Range*
Minimum, all pumps 40°F
Maximum, acetal pumps 180°F
Maximum, polypropylene pumps 150°F
Maximum, aluminum, stainless steel, PVDF pumps 225°F
Sound power level (measured per ISO standard 9614–2)
At 70 psi (0.48 MPa, 4.8 bar) at 50 cycles per minute 77 dB(A)
At 100 psig (0.7 MPa, 7 bar) at maximum cycles per minute 95 dB(A)
Sound pressure level (measured 1 m from pump)
At 70 psi (0.48 MPa, 4.8 bar) at 50 cycles per minute 67 dB(A)
At 100 psig (0.7 MPa, 7 bar) at maximum cycles per minute 85 dB(A)
Inlet/Outlet Sizes
Air inlet size 1/4 npt(f)
Air exhaust port size 3/8 npt(f)
Fluid inlet size 1/2 and 3/4 in npt(f) or bspt(f)
Fluid outlet size 1/2 and 3/4 in npt(f) or bspt(f)
Wetted Parts (in addition to ball, seat, and diaphragm materials, which vary by pump)
Polypropylene pumps polypropylene, PTFE
Acetal pumps groundable acetal, PTFE
PVDF pumps PVDF, PTFE
Non-wetted external parts
All pumps polypropylene, stainless steel, polyester and aluminum (labels), nickel-plated brass
Weight
Polypropylene pumps 6.5 lb (2.9 kg)
Acetal pumps 7.8 lb (3.5 kg)
PVDF pumps 8.5 lb (3.9 kg)
Santoprene® is a registered trademark of the Monsanto Company.

Graco XP70

Technical Specification

Motor Size NXT 6500
Max. Working Pressure psi (bar) 7250 (500)
Heater Optional
Ratio (Fixed) 1:1 to 4:1

Your Product Description

High pressure for two-part high solids coatings

Materials

Plural component protective coatings, epoxy coatings, high solids coatings, 2 Part PU coatings, Urethanes

Application

Structural Steel Coating, Ship building & marine, waste water treatment, corrosion control, offshore rigs, Pipe & tank coating, waste water treatment

Railcar Manufacturing & repair

Picture Gallery

Husky 2150 pump range

Benefits

  • Quick priming and immediate flow of product
  • Handles fluid viscosities up to 5,000 cps and solids up to 0.09 inch (2.29 mm)
  • Runs dry without damage. Provides air-tight seal for moisture-sensitive fluids
  • Easy-out seal provides fast slide in and out of drums (through bung adapter) without disconnecting hoses. Easy-out seal accommodates slightly off-sized drums up to 2-1/2 in. (63.5 mm).

Excellent for abrasive, low-to-medium viscosity fluids and shear sensitive materials

Features

  • Easy Maintenance
    Low internal volume reduces waste and makes clean-up easy. Stainless steel bolts resist vorrosion and provide positive positioning for easy reassembly.
  • Fluid Compatibility
    Housings available in aluminium, stainless steel, polypropylene, groundable acetal or Kynar.
  • Fluid Control Choice
    A wide range of seat and ball options ensure fluid compatibility and positive seal for maximum efficiency, long life and better suction lift.
  • Long-Lasting Rod Design
    300 Series stainless steel rod designed for long life and corrosion resistance – even in wet air.
  • Unique, Patented Air Valves
    Three-way Pilot Valve for non-sticking operation. All parts are replaceable without opening wet body parts. Aluminium parts are anodized or epoxy coated to resist corrosion usually caused by dirty air. No air-line lubrication is required.
  • Precision-Fitted Parts
    Long-wearing end-bearings assure positive rod alignment and are easily replaced.Graco Husky 2150 pump range
  • Rugged Exterior Construction
    Construction resists corrosion, prevents leakage and ensures clean fluid changes. Anodizing on aluminium wetted parts and e-coat epoxy air section resists tough environments.
  • Pump wetted parts and center section available in different materials
    The availability of multiple materials make it possible to use the pump in a wide range of applications: from low to high abrasive and corrosive fluids.

Typical Applications

  • Drum fluid transfer
  • Bulk fluid supply
  • Chemical evacuation
  • Ground water and sump evacuation
  • Waste fluid removal
  • Tank and bilge drainage
  • Slurry and sludge transfer
  • Filter press feed

Typical Fluids Handled

  • Acids and gases: acetic, chromic, hydrochloric, hydroflouric, sulphuric, nitric and phosphoric
  • Ship cleaning and stripping chemicals
Fluid Specifications
Fluid Flow, Max. 3900 cc per cycle (132 oz per cycle)
Fluid Flow, Max. 568 liters per minute (150 gallon per minute)
Fluid Working Temperature, Max. 65.5 °C (150 °F)
Fluid Viscosity 20000 cps
Fluid Inlet Size 2 in BSP(f)
Fluid Outlet Size 2 in BSP(f)
Material Wetted Parts Stainless Steel 316, Cast Iron, Aluminium, Fluoropolymer Resins (PVDF), Polypropylene (PP),
Air Specifications
Air Consumption 4995 liters per minute (176 scfm)
Air Inlet Size 1/4 in NPT(f)