Reactor E-10HP
Maximum fluid working pressure 3000 psi
Maximum spray pressure: 120 V 2200 psi
Maximum spray pressure: 230 V 2500 psi
Maximum fluid temperature 170°F
Maximum ambient temperature 120°F
Maximum output 1 gal/min
Output per cycle (ISO and RES) 0.0038 gallons/cycle
Air inlet 1/4 in. quick-disconnect industrial type pin fitting
Air outlet 1/4 npsm(m)
Overpressure relief Recirc/Spray valves automatically relieve excessive fluid pressure back to supply tanks
Gun compressed air requirements 3
Maximum hose length 105 ft
Tank capacity each (nominal) 6 gal
Weight (empty) 239 lb

Your Product Description

High-Pressure Coating Equipment for Polyurea
Entry-level system for pure and hybrid polyurea coatings

Feature

  • Ideal for small to medium projects such as terraces, pools, balconies,
    tanks, truck bedliners, secondary containment and waterproofing
  • Heats material fast for better productivity
  • Portable, compact and easy to maneuver
  • Easy to use
  • Uses standard residential electrical outlet
  • Affordable

Application

Secondary Containment Spill Prevention
Truck Bedliners
Waterproofing

Materials

Polyurea

Advance Polymer Coating – Jakarta Seminar

At 04th December 2014 Creative Engineering Indonesia PT has held the first seminar in Indonesia with tittle “Advance Polymer Coating” was held in Sun Lake Hottel- Jakarta. The seminar is supported by Graco Inc, Lockwell & Nukote Industries.This is a first time Graco product launching reactor 2 and Graco AFTD Ecoquip in Indonesia.

Seminar start from 08.30 WIB until 17.30 WIB, with attended more than 80 persons from 40 Company which experienced in Manufacturing and mostly all difference kind of applicator and coating industries from most of the island in Indonesia.

This Seminar to walk success because of the good cooperation from Mr Harryawan (Ascoatindo Secretary), Mr Tad Bass & Ms Marie Yoeng (Lockwell) Mr Antony Lim (Graco AFTD ASIAN) which not only introduction about Lockwell, Nukote Industries and Graco product but sharing also about applications, product benefits and the importance how to selection a good goods for coating industries in Indonesiato avoid damaged easily because Porous and corrosion and etc.

This seminar presenting also demonstration with Graco CED and AFTD product.With demonstrate from Mr Geofrey Chin (CEI) & Mr Burhanuddin Chaidar (Graco CED) for CED Product and Mr Liew Von Yung (CEM) & Mr Arief Rachman (Graco AFTD) for AFTD Product, how they apply and how they work, which make attendant feel interested and easy to understand about the product and how to use the product which not only make easier & simply for Painting and sandblasting system in Indonesia but fast, safety and environmentally friendly also.

This seminal can bring a lot of new ideal and case studiesamong our experienced in Painting, Coating and Sandblasting System.

Advance Polymer Coating - Jakarta Seminar

Advance Polymer Coating - Jakarta Seminar

Graco H-50

Technical Specification

Max. Working Pressure psi (bar) 2,000 (138)
Output 23.6 kg/min
Heater (kW) 12.0 ; 15.3 ; 20.4
Max Fluid Temperature 88°C
Max. Hose Length 410 ft (125m)
Weight 271 kg
Ratio 1:1

Your Product Description

Graco’s most powerful foam proportioner for high output applications

Materials

Foams & High Output PU

Application

Roof coating, pipe joint sealant, roof & wall insulation

Picture Gallery

Graco H-XP3

Technical Specification

Max. Working Pressure psi (bar) 3,500 (241)
Output 2.8 gpm (10.6 lpm)
Heater (kW) 12.0 ; 20.4
Max Fluid Temperature 88°C
Max. Hose Length 410 ft (125m)
Weight 271 kg
Ratio 1:1

Your Product Description

Designed for applying polyurea and other coatings that require high pressures, the Reactor H-XP2

Materials

Polyurea, Hybrid Polyurea, Polyureathane & Foam

Application:

Waterproofing, pipe & tank coating, waste water treatment, corrosion control, offshore rigs, ship building & marine.